RC Remote with increased resolution
Posted by
admin on Samstag 10 Dezember 2016
For my recent addiction to FPV racing I felt the original version of UnoJoy does not provide enough resolution to control precisely.
So I patched the original version and updated my Arduino code.
You find a new .hex file and the complete Arduino code in my dropbox: https://www.dropbox.com/sh/4fxa55napu0leg2/AAAlarZvOTDvEpadoomsMBexa?dl=0
Enjoy!
PS: My adapter works with all FPV drone simulators I’ve tests. For example FPV Freerider, Velocidrone and the DRL simulator
Samstag 4 März 2017 18:46
Hi.
Thanks for your post.
I like to use FS-i6 with ia6b for simulator on mac.
When i compiling i have
fatal error: EnableInterrupt.h: No such file or directory
#include
^
compilation terminated.
exit status 1
Error compiling for board Arduino/Genuino Uno.
Flightsim is in arduino library
In Flightsim is
Enableinterrupt folder
flightsim.ino
Unojoy.h
Some advace?
Thanks
Sonntag 5 März 2017 06:52
Hi.
please try to import EnableInterrupt in your arduino libraries or simply copy the folder there. This should fix your problem.
Let me know if that works!
Paul
Dienstag 7 März 2017 00:57
Hi
Thanks for replay.
I imported EnableInterrupt in Arduino Libraries,compiling and uploading Its perfect.
But ,i use arduino clone or dccduino uno and no DFU because is using ch340 chip for usb connection.
Till arrive “arduino” i will check another project with teensy.
Thanks again for your help
Dienstag 7 März 2017 06:50
A friend of mine had the same issue with his clone. You an also give that product a try, which is more or less the same as I proposed here with an arduino: http://www.banggood.com/IRangeX-FPV-Wireless-Simulator-For-PWM-PPM-S_BUS-DSM2-Receiver-p-1083772.html
Can you link me to that other project?
Thanks!
Dienstag 23 Januar 2018 12:39
Hello, i’m trying to connect my fsi6 to the pc via a reciever pwm able, i followed all the process you described.
1 upload the sketch, no problem on that
2 connect radio reciever ch 1/2/3/4 to pin 2/3/4/5
3 put arduino in DFU mode, upload .hex file, unplug and replug
4 arduino is recognized as controller, but in the proprieties of joystick, i just see everything moving randomly and blinking.
can you explain me why this is happening, and if there’s a solution?
PS is 3 days that i’m trying to archieve this!
Thanks for your help
Massimo
Samstag 22 Dezember 2018 07:58
Sorry I didn’t see your message until now. Did you solve your problem?